自动门的保养方法
Maintenance method of automatic door
检查自动门时,检查人员可以从观察门体开始。检查人员仔细的观察门体门槛是否有划痕、门叶间的缝隙十分有变化、各个设备是否有被腐蚀的痕迹,这些都是检查人员需要认真去检查的地方。
When checking the automatic door, the inspector can start from the
observation door body. The inspectors carefully observe whether there is
a scratch on the doorsill of the door, the gap between the doors and
the leaves is very changing, and whether there are any traces of
corrosion of each equipment. These are the places where the inspectors
need to be careful to check.
自动门想要正常的运行,清洁是一个关键。所以,在自动门的附近不能有过多的灰尘及废屑之类的物品,这些杂物都会对自动门的正常使用造成影响。同时定期清理自动门也会有效的延长自动门的使用寿命。另外,不管是在自动门的清理还是在维修的时候,检查人员一定要记住先关闭电源,这样才能安全的进行清洁。
Automatic door to normal operation, cleaning is a key. Therefore,
in the vicinity of the automatic door can not have too much dust and
scrap, and other things, these debris will affect the normal use of
automatic doors. Meanwhile, regular cleaning of automatic doors will
also effectively extend the service life of automatic doors. In
addition, no matter in the automatic door cleaning or maintenance, the
inspector must remember to turn off the power first, so that the
cleaning can be carried out safely.
自动门在运行时,自动门的各部件间的配合很重要。自动门想要开关,就会使用到地面上的地轮。所以,对于这些东西,检查人员一定要进行长期的保养及定期的检查,不能让自动门存在故障的隐患,这样也可以避免自动出现锈渍。
When the automatic door is running, the coordination between the
components of the automatic door is very important. If the automatic
door wants to switch, it will use the ground wheel on the ground.
Therefore, for these things, the inspectors must carry out long-term
maintenance and regular inspection, can not allow the automatic door
failure of the hidden danger, this can also avoid automatic rust stains.
After using the automatic door for a period of time, the inspector
needs to clean the chassis of the automatic door. The automatic door box
will accumulate a lot of dust in operation, and these dust will cause
problems in the use of automatic doors. Therefore, the cleaning of the
automatic door box is very important.